Ever wondered how much it would cost to have your home’s electrical wiring redone? How about installing the electrical wiring into a new home? In general, there are a number of factors that determine just how much it would cost for a homeowner to get the electrical wiring done. On average, costs can start from $2,000 to $9,000 depending on several factors. Often times, the total costs would vary depending on the wiring, electrician’s hourly rates, and the other materials. However, that’s just the general idea of how the costs of wiring installation are broken down.
Here’s a more detailed explanation on how much wiring installation will cost
The costs of new wiring North Myrtle Beach will greatly vary depending on a number of things including how much the electrician charges per hour and the quality of the wiring itself. The typical range for wiring installation starts from $790 for the lower end, $2,115 for average wiring, and $3,617 for the higher end wiring setup. However, smaller wiring jobs can be as low as $125 and can jump to $9,400 depending on the size of the house.
Cost of electrical wiring per square foot
On average, the cost of installing new wiring is often at $2 to $4 per square foot. That’s just for the installation and does not cover the actual cost of the wiring itself. Depending on the type of wiring, it could range from $6 to $8 per linear foot. As for the installation, it will largely depend on the company of your choosing. Electrical companies like NMB Electrician Pros offer quality service for reasonable rates.
The average cost of rewiring a house
For a house that has a floor area of 1,000 square feet, the average cost for rewiring is around $2,000 to $6,000 which equates to $2 to $4 per square foot. The cost only goes up with larger houses that reach over 2,500 square feet and involves opening up the walls. Normally, the costs for this operation would reach $12,000 to $20,000. Other factors that affect pricing include the size of the house, accessibility of the wiring, and upgrades to the electrical panel.
Costs of wiring a new house
Unlike rewiring an older house, setting up the wiring for a new house is a lot cheaper. The cost for wiring a 1,000 square foot house ranges from $1,600 to $3,800. Of course, the cost will only go up depending on the complexity of the design, the number of bedrooms, and the number of electrical outlets and switches.
Why is it cheaper to wire a new house?
The reason is quite simple. It’s the accessibility that makes it a lot cheaper to wire a new house than an older one. As opposed to an old house, a new one will have open walls. Before the walls could be set in place, the wiring must be installed first. This means the electricians have all the accessibility they need to properly install the wiring and at a speedy pace. This greatly cuts the cost when you compare it to wiring an older house. You would also need to find the right electrician for the job if you want quality and fast installation.
Call NMB Electrician Pros if you are looking for a reliable electrician in your area.
NMB Electrician Pros
North Myrtle Beach, SC 29582